Input Channel; Input Channel – Eq 4 - QSC TouchMix-30 Pro User Manual

Input Channel – EQ
Input Channel − EQ
Controls and displays the settings for the Input Channel
equalization.
1. EQ tab – Selects the EQ screen.
2. EQ In – Engages / disengages the equalizer.
3. RTA On – Engages the Real Time Analyzer display.
NOTE!: A maximum of two RTA displays
for TouchMix-30 Pro, and one RTA display
for the TouchMix-8 and -16 are available
at a time on any combination of a mixer
and tablet devices.
NOTE!: When the RTA is off, the
Parametric EQ graph expands to use the
entire graph area.
4. Simple button – Hides the Low Cut, High Cut,
Frequency, and BW controls. Does not effect
existing settings.
5. Reset button – Sets all the EQ controls to their
factory default position.
6. RTA display – Displays the amplitude of the
channel signal in 1/3 octave bands. Peak hold is
displayed only on tablet devices.
7. Parametric EQ graph – A graphic representation
of the equalization curve based on the EQ settings. The trace dims to indicate that the EQ is Out (disengaged).
• EQ graph vertical scale – Represents audio level from -20 dB to +20 dB.
• EQ Nraph horizontal scale – Represents frequency from 20 Hz to 20 kHz.
8. EQ Handles – Touch, hold, and drag to change the Frequency and Gain of the associated EQ band. The frequency band button must be
engaged to see the EQ Handles.
9. Low Cut and High Cut fi lter buttons – These fi lters cut frequencies below or above the frequency set by the corresponding Freq control.
10. Low Shelf and High Shelf fi lter buttons – Changes EQ Band 1 and Band 4 from parametric fi lters to shelving fi lters. When a shelf fi lter is
engaged, the Bandwidth control is not available.
11. Frequency Bands 1, 2, 3, and 4 buttons – Engages / disengages the associated parametric EQ band. Each band is fully parametric with a
frequency range of 20 Hz to 20 kHz.
12. Nain control knob and readout – Adjusts the gain at the frequency setting of the associated EQ band. Range of -15 dB to +15 dB.
13. Freq control knob (Frequency bands 1 – 4) – Sets the center frequency of the associated EQ band. If the Shelving fi lter is engaged, the Freq
control sets the knee frequency of the shelf fi lter.
14. Q knob – Adjusts the bandwidth of the associated EQ band. When the Shelf Filter is selected, the Bandwidth control is hidden. In addition, Q
can be adjusted by "pinching" (TouchMix-30 Pro and tablet apps only).
15. Freq control knob (Low and High Cut) – Sets the frequency of the low and/or high cut fi lter as measured from a point 3 dB below 0 or unity.
16. buttons – Navigates to the next or previous channel. The buttons cycle through the Input, playback, record, and FX channels, then
loops back to Input 1.
17. Channel controls – Output controls for selected channel. See Channel Controls topic.
18. Main Channel controls – Output controls for the Main L/R outputs. See Channel Controls topic.
1001108-01-C
Home
Inputs 1-8
In 1
Inputs 1-8
1
Main Mix
L/R
Overview EQ Comp
2
Joe's Ears
PEQ
Aux 1
Out In
Aux 2
6
Aux 2
-5
Aux 3
-15
Aux 3
-30
Aux 4
Aux 4
-45
Aux 5
-60
Aux 5
31.5 40 50 63 80 100 125 160 200 250 315
7
Aux 6
20
Aux 6
10
Aux 7
1
Aux 7
0
Aux 8
Aux 8
-10
Aux 9
Aux 9
-20
9 10
20Hz 50 100 200
Aux 10
Aux 10
1
Aux 11
12
Aux 11
Low Cut Gain
0.00
Aux 12
dB dB
Aux 12 15
13
Freq
Freq
120
80.0
Aux 13
Hz Hz
Aux 13
14
Q
Hz
Aux 14 1.00
Aux 14
44
Touch a
Touch an
Channel
Input Bank
Selector
EQ
Gate FX Auxes Presets Setup
5
3 4
RTA On Simple Reset
400 500 630 800 1K 1.2 1.6 2K 2.5 3.1 4K 5K 6.3 8K 10K 12.5
4
8
3
10
500 1K 2K 5K 10K
11
2 3 4
Gain Gain Gain High Cut
0.00 0.00 0.00
dB dB
15
Freq Freq Freq
400 2.0K 6.0K
Hz Hz
Q Q Q
1.00 1.00 1.00
Touch the
EQ Tab
16
Scene:
Default
Prev Next
In 1 Main
17 18
-5
Cue Cue
-15
-30
L C R
-45
Mic Main
-60 1 L/R
16K
10 10
10 10
20
5
5
10
L L
u
u
F
G
5
0
48
5
10
10
-10
-20
9
20K
20
0 20 0
LR
40 40
1 2
3 4
∞
Freq
5 6
8.0K
7 8
Hz
Mute Mute