Mp-M Hardware; Front Panel; Rear Panel - QSC MP-M80 User Manual

MP-M Hardware

Front Panel

NOTE!: MP-M80 is shown.
1. – Headphones, 3.5 mm, stereo
CUE
2. USB – USB-A (rear panel – 1, front panel – 1), firmware & configuration uploads, USB Wi-Fi
3. STATUS –
Action
Off
On
Slow Blink
SOS Blink
4. PO ER –
On Off

Rear Panel

NOTE!: MP-M80 is shown.
1
1. – Mic / Line Inputs, balanced, 12 V Phantom power, MP-M80 has 8 inputs, MP-M40 has 4 inputs, 6-pin Euroblock
INPUTS (MIC/LINE)
connectors
2.
INPUTS (MONO SUMMINN)
3. OUTPUTS (LINE LEVEL)
Euroblock connectors
4. MUSIC ON HOLD – Transformer-balanced, 3-pin Euroblock connector
5. – USB-A (rear panel – 1, front panel – 1), firmware & configuration uploads, USB Wi-Fi
USB
6. Ethernet – RJ45 For connecting to a network, wired and/or wireless.
7. NPI – 2 Inputs, Euroblock
8. – MP-MFC ports, up to 4 MFC's per connection, 2 RJ45 connectors
MFC
9. AC Mains – power connection, 100-240 V, ~85 W, 50/60 Hz
CAUTIONG!: If AC power is removed, wait for 5 seconds before reapplying the AC power.
TD-001578-01-C
Appearance
2
– RCA Pairs, summed to mono, MP-M80 has 8 pairs, MP-M40 has 4 pairs
– Balanced, Line Level, MP-M80 has 8 line level outputs, MP-M40 has 4 line level outputs, 6-pin
Definition
OK
Booting
Firmware Upgrade
Upgrade Failure
5
3
4
6
2
8 9
7