Wizards; Fx Wizard - QSC TouchMix-30 Pro User Manual

izards

FX Wizard

FX izard
The FX Wizard aids in selecting and routing effects.
1. FX1 - 6 tabs – Selects one of six FX processors.
(Four on TouchMix-8 and TouchMix-16)
NOTE!: The Source, Type, and FX Preset
windows provide a means of selecting an
Effect based on what the source is. If any
of the lists fi ll the window, fl ick up on the
list to show more selections.
2. Source list – Use the Source window to select the
source instrument category.
3. Type list – Use the Type windows to select
the specifi c type of instrument. This narrows
the selection to a list of recommended presets
appropriate for the application.
4. FX Preset list – Use the FX Preset window to
select the Effect and variation. For example, in the
FX Preset window the letter "D" refers to the Dense
Reverb Effect, and the text following the letter
indicates the Preset (variation) of the Dense Reverb.
5. Recall button – Loads selected effect.
6. Clear button – Unassigns all the inputs
and outputs.
7. Select inputs to feed
– Each input channel is represented by a button.
Touch one or more of these buttons to apply the effect to an input.
8. Cue button – Touch Cue above the FX fader to hear the output of the selected effect on the Cue system.
9. Select Aux Output buttons – Each Aux Output is represented by a button. Touch one or more of these buttons to send the effect to the
associated Aux Output.
1001108-01-C
Wizard
Label
81
FX Wizard
Press Touch
Wizard FX Wizard