Output Channel - Speaker Settings; Output Channel - Gxd Amp Settings - QSC TouchMix-30 Pro User Manual

Output – Speaker Settings
Provides Gain setting recommendations for QSC
powered loudspeakers. Also provides a list of available
loudspeaker presets for various applications on both
powered and passive loudspeakers. Note that these
presets are not available for all QSC loudspeakers.
1. Select Speaker – Touch to select the QSC
loudspeaker connected to the output.
2. Preset – Select a preset for the connected
loudspeaker.
a. If you are using a powered loudspeaker make
sure the DSP is set to the default preset.
b. If you are using an E Series (passive)
loudspeaker make sure that any DSP in the
amplifi er is set to the default preset. The QSC
GXD loudspeaker has a setting for TouchMix
mixers. Refer to the GXD topic.
3. Set the Nain – Adjust the Gain knob on your
powered loudspeaker to the position indicated by
the illustration and the text below it.
4. When fi nished, touch the Done button.
NOTE!: Subwoofer level may be adjusted to get the desired relative high/low balance.
When the speakers are adjusted as directed, signal to noise ratio is optimized and the output meters on the mixer refl ect how much speaker
system headroom is available. Note that the LIMIT LED on the speakers is not a Clip indicator. It will be lit before the mixer's meters indicate
any overdrive. This is because the speakers' DSP is preventing dynamic peaks in the program from overdriving the amplifi er and speakers.
NXD Amp Settings
Provides help in properly adjusting QSC GXD Amplifi er when used with
the TouchMix.
On the GXD Amplifi er
1. Home – If the amplifi er's Gain screen is not displayed, press the Home button.
If the Gain screen is displayed, skip to the next step.
2. Adjust the Gain A and Gain B knobs for 0.0 dB gain. Enter – Moves to the
next screen.
3. Adjust the Gain B/DSP Control knob to select Stereo DSP. Enter – Moves to
the next screen.
4. Adjust the Gain B/DSP Control knob to select Sensitivity. Enter – Moves to the
next screen.
5. Adjust the Gain B/DSP Control knob to select TouchMix.
Enter – Confi rms selection.
6. Home – Returns to the Home screen.
On the TouchMix
1. Done – Closes the GXD Amp Settings pop-up.
1001108-01-C
Press
Home
Aux Out 1 - 8
Aux 1
Inputs 1-8
Select QSC Speaker Model and Preset Name to display Gain Settings or Recall a Preset
3
2
Model Preset Name
K8.2
Dance
K10.2 Floor Monitor
K12.2 Live Bright
Live
Studio
Vocal Monitor
Done Recall Preset
Press
Home
Aux Out 1 - 8
Inputs 1-8
Navigate to "Home"
Gain A
Gain B
Gain B
Gain B
Gain B
59
Touch an Touch an
Output Output
Bank Channel
K Series
K10.2
0dB
1
OFF
GAIN
Rotate Gain knob 5 detents (clicks) past zero.
Touch an Touch an
Output Output
Bank Channel
Aux 1 Ampli ers
QSC GXD Ampli er Settings
HOME
HOME
0.0 dB
0.0 dB
ENTER
STEREO DSP
ENTER
SENSITIVITY
ENTER
TOUCHMIX
ENTER
HOME
Done
Touch
K Series
+10dB
Touch
Amplifi ers