Wireless Network Setup: Connect To Existing Network - QSC TouchMix-30 Pro User Manual

Wireless Network Setup: Connect to Existing Network

Wireless Network Setup: Connect to Existing Network
IMPORTANT!: Requires an Ethernet
Wi-Fi router and the USB Wi-Fi adapter
(QSC Part # cp-000033-00).
Connecting to an Existing Network using a
USB Wi-Fi dongle provides short range wireless
communication between a TouchMix mixer and a longer
range wireless Ethernet router. The Android and/or iOS
devices with the TouchMix app installed communicate
with the TouchMix via the Ethernet wireless router.
1. Mixer Name: – Enter a name for the mixer.
2. Network Type: – Set to
3. Select Connect to Existing Network.
4. Network SSID!: – Enter a known SSID of an
Ethernet wireless router, or touch Scan. Select the
desired network from the list that displays.
5. Scan – The mixer searches for, and displays, a list
of available wireless networks. Select the desired
network.
6. Password: – Enter the password for the network
being joined.
7. Security!: – Select the Security setting used by the
network.
8. Apply – Touch to confi gure the mixer. External
devices may now log on to the mixer using the
external network Name and Password.
1001108-01-C
Main Mix
L/R
Joe's Monitor
Aux 1
Aux 2
Aux 2
Aux 3
Aux 3
Aux 4
Aux 4
Aux 5
Aux 5
ireless.
Aux 6
Aux 6
Aux 7
Aux 7
Aux 8
Aux 8
Aux 9
Aux 9
Aux 10
Aux 10
Aux 11
Aux 11
Aux 12
Aux 12
Aux 13
Aux 13
Aux 14
Aux 14
Menu Network Wireless
Network Setup
1
Mixer Name: My TM-30
3
Connect to Existing Network
Network SSID:
Password:
7
Security
110
Press Touch
Menu Network
2
Network Type:
Wireless
Wireless Network Settings
Create New Network
4
5
External Router Scan
6
Password
WPA WPA2
WEP-40
(AES+TKIP) (CCMP)
Signal Strength:
8
Apply
Select a Network:
Found Networks
Wireless ABC
Joe's Network
TM-30 - practice only
Select
Touch
Wireless
Scene:
Default
Wired
Main
Cue
Main
L/R
10 10
5
L
u
AF
5
10
20
0
40
∞
Mute
Cancel