QSC TouchMix-30 Pro User Manual page 110

DA – Record / Playback (TouchMix-30 Pro only)
Record to and Playback from a Digital Audio
Workstation.
IMPORTANT!: The TouchMix-30 Pro
DAW interface is compatible with
Core-Audio compliant computers only.
1. Track button – Touch the Track button to select a
DAW track as the source for the channel.
2. DA – Indicates if the mixer is receiving audio from
the DAW (Connected) or not (Not Receiving Audio).
3. Sample Rate switch – Switches the mixers
sample rate between 44.1 kHz and 48 kHz. The
mixer must be the sample rate clock master.
4. Recording Mode button – Touch this to
change the Recording Mode to MP3 Playback or
Multitrack USB.
5. Channel Activity – Lights to indicate audio is
being received from the DAW on that channel.
NOTE!: To manage connections on the
Mac – Open "Audio MIDI Setup" and select
"QSC TM30 Pro.
1001108-01-C
DA – Record / Playback (TouchMix-30 Pro only)
Recording
Rec/
Play
Mode
101
Press
Rec / Play
Multitrack
DAW
Touch Touch
Recording Multitrack
Mode DAW