Using Pitch Correct; Using The Fx Channel Effect Tab; Using The Fx Overview - QSC TouchMix-30 Pro User Manual

Using Pitch Correct

Use the Blend control to vary the mix between corrected (wet) and uncorrected (dry) signal. 100% wet is used to correct pitch. A blend between wet
and dry is used to provide a doubling effect.
Use the Key control to select a musical key. This helps Pitch Correct be more accurate in determining what the intended note is.
Use the Correct Rate control to adjust how quickly the pitch correction tracks.

Using the FX Channel Effect Tab

Go to the FX Channel Effect Tab (From the Input Channel FX tab):
To Access the FX Control Panel:
Touch the Effect window to select the type of effect.
• Chorus
• Stereo Delay
• Pitch Shift
• Dense Reverb
• Lush Reverb
• Mono Delay
Once an Effect is selected touch the Preset Tab. From this screen select a preset setting for the effect. Note that the setting can include EQ. Factory
presets are displayed in the left-hand window. User presets may be stored and recalled using the center and right-hand windows.
To select an Effects preset:
Touch the Effect Tab to return to the Effect Processor control panel. Each type of Effect Processor displays a different control panel with parameters
appropriate for the Effect.
Use the FX Master fader to the right of the FX panel to adjust the amount of effect heard in the main speaker system.
To adjust the level of the Effect sent to the Main L/R Output:
Below the Effect control panel is the FX Returns to Monitors section. Use the sliders to set how much of the effect is sent to each auxiliary / monitor
mix. If two auxiliaries have been linked, a slider and a pan control will be displayed. Above each slider is a channel label and a Mute [M] indicator.

Using the FX Overview

If you would prefer to see the send and return levels for all your effects at once, the FX overview is the place to go.
To use the FX Overview:
1. Input channels are arranged in columns. Use the Nav Strip to select a group of Input channels. Each Input channel sends for FX Sends 1–4
(TouchMix-8 and TouchMix-16) and 1 – 6 (TouchMix-30 Pro).
2. Individual FX Mixes are arranged in horizontal rows.
3. FX Master fader – The FX Master fader controls the overall output level of the FX Mix to the Main L/R outputs. Note that the FX Master does not
affect the level of the Effect sent to the Aux channels.
4. Effect Processor – Indicates the type of Effect currently being applied to the FX Mix.
So that's about it for effects. We worked hard on the TouchMix effects and know that they sound superb and will enhance your performances. You
can dive in deep or just use the wizards, factory defaults and presets. Either way, you now have the tools for a great sounding show.
1001108-01-C
FX Masters 1-8
FX Masters 1-8
Recall
Menu
FX Overview
FX 1
E ect
FX 1 Presets
Yes E ect
5
Factory
Pitch-Light Detune
Pitch-Medium Detune