Copy And Paste - QSC TouchMix-30 Pro User Manual

Copy and Paste

Copy and Paste
The TouchMix-30 Pro has a powerful but simple copy and paste function that is operated by the U7 (copy) and U8 (paste) buttons. Copy and Paste
is context sensitive so that what you are looking at is what will be copied. Only like things may be copied and pasted from and to each other. For
example, a PEQ cannot be pasted to a GEQ. The table below explains what parameters will be copied and pasted.
NOTE!: The copy buffer retains the last item of each type that has been copied. If, for example a GEQ setting is copied and then a
Gate is copied, both will reside in memory. If a GEQ is displayed, Paste will recall the copied GEQ parameters. If a Gate is displayed,
Gate parameters will be pasted.
To Copy and Paste Parameters:
• Navigate to the screen that displays the values to be copied.
• For the TouchMix-30 Pro – Press U7, for the TouchMix-8 and TouchMix-16 – Press U2 (Copy)
• Navigate to the destination screen.
• TouchMix-30 Pro – Press U8, TouchMix-8 and TouchMix-16 – Press U3 (Paste)
Let's say you want to copy the mix that's on Auxiliary 1 to Auxiliary 5...
Press Touch an
Home Aux Bank
Aux Out 1-8
Aux 1
Inputs 1-8
After set-up is complete, it may be useful to clear the Copy/Paste buffer. This will prevent accidentally pasting parameters during the show. To clear
the Copy / Paste memory:
Press Touch
Menu Copy/Paste
Menu Copy / Paste
hat is Displayed
Main or Auxiliary Faders View
Input Channel Overview Tab
Input Channel EQ Tab
Input Channel Comp Tab
Input Channel Gate Tab
Input Channel FX Tab
Input Channel Aux Tab
Input Channel Setup Tab
Output Channel Overview Tab
Output Channel PEQ Tab
Output Channel GEQ Tab
Output Channel Anti-Feedback Tab
1001108-01-C
Press
Touch an
U7 / U2
Aux Channel
Copy
U7 U2
Touch
Yes
Yes
hat is Copied and Pasted
Fader, Mute and Pan
EQ, Compressor, Gate, FX sends, Aux Sends, Digital Gain, Delay, Group Assigns, Polarity
All channel EQ parameters
All channel Compressor parameters
All channel Gate parameters
All channel FX send levels
All channel Auxiliary Send levels and Pan positions
Recording Arm, Polarity, Delay, Digital Gain, Group assignments
PEQ, Limiter, FX sends, Aux Sends, Delay, Group Assigns, Polarity, Pick-Off Point (Auxes only)
All channel PEQ parameters
All channel GEQ parameters
All channel Anti-feedback parameters
Press
Touch an
U8 / U3
Aux Channel
Paste
U8 U3
Aux 5
118