Output Channel - Peq - QSC TouchMix-30 Pro User Manual

Output Channel – PEQ
Output Channel − PEQ
Controls and displays the settings for the Main or
Auxiliary output parametric equalization.
1. PEQ tab – Selects the PEQ screen.
2. PEQ In/Out switch – Engages / disengages
the equalizer.
3. RTA On button – Turns the RTA (Real-time
Analyzer) on and off.
NOTE!: When the RTA is off, the
Parametric EQ graph expands to use the
entire graph area.
4. Simple button – Hides the Low Cut, High Cut,
Frequency, and BW controls. Does not effect
existing settings.
5. Reset button – Sets all EQ controls to factory
default values.
6. RTA graph – Displays the amplitude of the channel
signal in 1/3 octave bands. Peak hold is displayed
only on tablet devices.
7. Parametric EQ graph – A graphic representation
of the equalization curve based on the EQ settings.
The trace dims to indicate that the EQ is Out
(disengaged).
• EQ Nraph vertical scale – Represents audio
level from -20 dB to +20 dB.
• EQ Nraph horizontal scale – Represents frequency from 20 Hz to 20 kHz.
8. EQ Handles – Touch, hold, and drag to change the Frequency and Gain of the associated EQ band. The frequency band button must be
engaged to see the EQ Handles.
9. Low and High Cut Filter buttons – These fi lters cut frequencies below or above the frequency set by the corresponding Freq control.
10. Low and High Shelf Filter buttons – Changes EQ Band 1 and Band 6 from parametric fi lters to shelving fi lters. When a shelf fi lter is
engaged, the Bandwidth control is not available.
11. Frequency Bands 1 - 6 In/Out buttons – Engages / disengages the associated parametric EQ band.
12. Nain knob – Adjusts and displays the gain at the frequency setting of the associated EQ band. Range of -15 dB to +15 dB.
13. Freq knob – Adjusts and displays the center frequency of the associated EQ band. The range is 20 Hz to 20 kHz for all bands. If the Shelving
fi lter is engaged, the Freq control sets the knee frequency of the shelf fi lter.
14. Q knob – Adjusts the bandwidth of the associated EQ band. When the Shelf Filter is selected, the Bandwidth control is hidden. Q may also be
adjusted by "pinching" (TouchMix-30 Pro and tablet apps only).
15. Freq knob (Low and High Cut) – Sets the knee frequency of the low and/or high cut fi lter as measured from a point 3 dB below 0 or unity.
16. Prev / Next buttons – Navigates to the next or previous channel. The buttons cycle through the Input, Playback, Record, and FX channels,
then loops back to Input 1.
17. Channel controls – Output controls for selected channel. See Channel Controls topic.
18. Main Channel controls – Output controls for the Main L/R outputs. See Channel Controls topic.
1001108-01-C
Home
Aux Outputs1-8
Aux 1
Inputs 1-8
1
Main Mix
L/R
Overview PEQ GEQ
2
Joe's Monitor
PEQ
Out In
Aux 1
Aux 2
6
Aux 2
Aux 3
Aux 3
Aux 4
Aux 4
Aux 5
Aux 5
7
Aux 6
Aux 6
1
Aux 7
8
Aux 7
Aux 8
2
Aux 8
Aux 9
Aux 9
9
10
20Hz 50 100 200
Aux 10
1 2
Aux 10
Aux 11
12
Low Cut Gain Gain
Aux 11
0.00 0.00
Aux 12
dB dB dB
15
13
Freq
Aux 12
Freq Freq
120
80.0 200
Aux 13
Hz Hz Hz
Aux 13 14
Q Q
Hz
1.00 1.00
Aux 14
Aux 14
53
Touch an Touch an
Aux Bank Aux Channel
PEQ
Anti-
Comp Auxes Presets Setup
Feedback
3 4 5
RTA On Simple Reset
3
5
4
6
10
500 1K 2K 5K 10K
11
3 4 5 6
Gain Gain Gain Gain
0.00 0.00 0.00 0.00
dB dB dB
15
Freq Freq Freq Freq
500 1.00k 3.0k 8.0k
Hz Hz Hz
Q Q Q Q
1.00 1.00 1.00 1.00
Touch the
PEQ Tab
16
Scene:
Default
Prev Next
Main
Joe's Monitor
17 18
Cue Cue
L C R
Aux Main
1 L/R
10 10
10 10
5 5
C L
u
u
F
F
5
5
10
10
9
20K
20
0 20
0
High Cut
LR
40
40
1 2
3 4
∞
Freq
5 6
8.0K
7 8
Hz
Mute Mute