QSC TouchMix-30 Pro User Manual page 32
Hide thumbs
Also See for TouchMix-30 Pro:
- User manual (146 pages) ,
- Windows driver manual (2 pages) ,
- Technical notes (2 pages)
Table of Contents
Advertisement
9. Touch
Measure
. The mixer produces the test signal and captures the measurement data.
NOTE!: Each output of a TouchMix mixer actually has two graphic equalizers. One is used by the Tuning Wizard to apply corrections
based on the measurement data. Settings for this equalizer are indicated by the outlined or "ghost" fader caps on the GEQ screen. The
other equalizer may be adjusted by the user.
10. Select a target tuning.
» Select
– The wizard flattens the system response using the Tuning EQ and sets the user EQ to flat. You
Flat
can adjust to taste from there.
» Select
– The wizard flattens the system response and applies a User EQ setting that works well for live
Live
sound reinforcement systems.
» Select
– The wizard flattens the system response using the Tuning EQ but leaves the user EQ settings
Keep Existing
untouched.
11. Touch
Restart
if the measurement is interrupted by, for example, unexpected, loud ambient noise. Perform the
measurement again.
12. Touch
Finish
to continue.
Navigate To GEQ
13. Touch
1001108-01-C
to view the GEQ settings.
23
Advertisement
Table of Contents
