Sub Group - Peq (Touchmix-30 Pro Only) - QSC TouchMix-30 Pro User Manual

Sub Nroup – PEQ (TouchMix-30 Pro only)
Sub Nroup − PEQ
(TouchMix-30 Pro only)
Controls and displays the settings for the Sub Group
parametric equalization.
1. EQ tab – Selects the PEQ screen.
2. PEQ In/Out switch – Engages / disengages the
equalizer.
NOTE!: When the RTA is off, the
Parametric EQ graph expands to use the
entire graph area.
3. RTA On button – Turns the RTA (Real-time
Analyzer) on and off.
4. Simple button – Hides the Low Cut, High Cut,
Frequency, and BW controls. Does not effect
existing settings.
5. Reset button – Sets all EQ controls to factory
default values.
6. RTA graph – Displays the amplitude of the channel
signal in 1/3 octave bands. Peak hold is displayed
only on tablet devices.
7. Parametric EQ graph – A graphic representation
of the equalization curve based on the EQ settings.
The trace dims to indicate that the EQ is Out
(disengaged).
• EQ graph vertical scale – Represents audio level from -20 dB to +20 dB.
• EQ graph horizontal scale – Represents frequency from 20 Hz to 20 kHz.
8. EQ Handles – Touch, hold, and drag to change the Frequency and Gain of the associated EQ band. The frequency band button must be
engaged to see the EQ Handles.
9. Low and High Cut Filter buttons – These fi lters cut frequencies below or above the frequency set by the corresponding Freq control.
10. Low and High Shelf Filter buttons – Changes EQ Band 1 and Band 6 from parametric fi lters to shelving fi lters. When a shelf fi lter is
engaged, the Bandwidth control is not available.
11. Frequency Bands 1 - 6 In/Out – Engages / disengages the associated parametric EQ band.
12. Nain knob – Adjusts and displays the gain at the frequency setting of the associated EQ band. Range of -15 dB to +15 dB.
13. Freq knob – Adjusts and displays the center frequency of the associated EQ band. The range is 20 Hz to 20 kHz for all bands. If the Shelving
fi lter is engaged, the Freq control sets the knee frequency of the shelf fi lter.
14. Q knob – Adjusts the bandwidth of the associated EQ band. When the Shelf Filter is selected, the Bandwidth control is hidden. In addition to the
Q knob, you can use a two-fi nger pinch / zoom to control the Q.
15. Freq knob (Low and High Cut) – Sets the knee frequency of the low and/or high cut fi lter as measured from a point 3 dB below 0 or unity.
16. buttons – Navigates to the next or previous sub group. The buttons cycle through the Input, Playback, Record, and FX channels, then
loops back to Input 1.
17. Sub Nroup controls – Output controls for selected Sub Group.
18. Main Channel controls – Output controls for the Main L/R outputs. See Channel Controls topic.
1001108-01-C
Press
Home
Sub Groups
Sub 1
Inputs 1-8
1
Main Mix
L/R
Overview EQ
2
Joe's Ears
PEQ
Aux 1
Out In
Aux 2
Aux 2
6
-5
Aux 3
-15
Aux 3
-30
Aux 4
Aux 4
-45
Aux 5
-60
Aux 5
31.5
Aux 6 7
Aux 6
Aux 7
Aux 7
1
2
Aux 8
Aux 8
Aux 9
Aux 9
9 10
20Hz
Aux 10
Aux 10
1 2
Aux 11
Aux 11 12
Low Cut Gain Gain
0.00 0.00
Aux 12 dB dB dB
Aux 12
15
13
Freq
Freq Freq
120
80.0 200
Aux 13
Hz Hz Hz
Aux 13
14
Q Q
Hz
Aux 14 1.00 1.00
Aux 14
62
Touch a Sub Touch a
Group Bank Sub Group
EQ
Comp FX Auxes Presets Setup
3 4 5
RTA On Simple Reset
5 6
8
3
4
10
11
3 4 5 6
Gain Gain Gain Gain High Cut
0.00 0.00 0.00 0.00
dB dB dB
15
Freq Freq Freq Freq
500 1.00k 3.0k 8.0k
Hz Hz Hz
Q Q Q Q
Hz
1.00 1.00 1.00 1.00
Touch the
EQ Tab
16
Scene:
Default
Next
Prev
Sub 1 Main
17 18
-5
Cue Cue
-15
-30
L C R
-45
Sub Main
1 L/R
10 10
10 10
5
5
C L
u u
F AF
0 5
5
10
10
9
20
0 20 0
LR
40 40
1 2
3 4
∞
Freq
5 6
8.0K
7 8
Mute Mute