Input Channel - Setup - QSC TouchMix-30 Pro User Manual

Input Channel – Setup
Input Channel − Setup
Channel Setup is provided for all input channels. Line
input channels do not have Phantom power controls.
1. Setup – Selects the Setup screen
2. Name – Displays the name of the channel. Touch to
display a keyboard and rename the channel.
3. Link – Links adjacent channels. The odd numbered
channel settings are copied to the even numbered
channel. Pan settings are mirrored. Only odd > even
pairings are supported – even > odd pairings
are not.
4. Reset – Resets the controls for this channel to
factory defaults.
5. Playback and Recording
When one of these buttons is engaged, the other is not
displayed. The example above is for illustration only.
• Digital Input – (TouchMix-30 Pro only) Selects
the channel's analog or digital input as the
signal source. The digital source may be from a
USB recording session or from a DAW (see Rec/
Playback for more information). Green = digital,
gray = analog.
• Recording (Arm) – When engaged, the
audio on this channel will be recorded on the
USB Drive. Available only when the External
Recording & Playback Mode is set to Multitrack
USB Drive.
6. Polarity – Touch to change polarity of the channel output.
7. Mic Phantom – Turns 48V phantom power on/off for the channel (microphone inputs only).
8. Patch Matrix Channel – (TouchMix-30 Pro only) Displays the current setting for this channel in the Patch Matrix. If another channel has been
patched to this channel, the fi eld would display the patched channel's number.
9. Delay – Delays the input signal from 0.00 to 100 milliseconds. Touch the In button to activate the delay.
10. Channel Safe During Scene Recall – Setting this switch to Safe, protects the channel controls from being changed when a Scene is recalled.
11. Digital Nain – Applies +/- 15 dB of digital gain to the channel signal independently of the channel's analog gain trim. The setting of this control
is stored and recalled with a scene or preset. When Track is selected as the source, the control applies to the digital input.
12. Main L/R – Assigns the channel's output to the Main Left / Right mix. The factory default is on – assigned to Main L/R.
13. Subgroups – (1 through 8 – TouchMix-30 Pro only) – Assigns the output of the channel to one or more of the eight Sub Groups. User-assigned
names display on the buttons. See the Subgroups topic.
14. DCA Nroup (1 through 8) – Assigns the channel to DCA Groups. User-assigned DCA Group names display on the buttons. See the DCA Groups
topic.
15. Mute Nroups (1 through 8) – Assigns the channel to Mute Groups. User-assigned Mute Group names display on the buttons. See the Mute
Groups topic.
1001108-01-C
Home
Inputs 1-8
In 1
Inputs 1-8
Main Mix
L/R
Overview EQ Comp
2
Joe's Ears
Aux 1
Banjo
Aux 2
Aux 2
5
Digital Input Recording
Aux 3
Aux 3
Track Arm
Aux 4
Aux 4
Units
9
Delay
Aux 5
0.00 feet
Aux 5
In In
0.00 ms
Aux 6
Aux 6
0.00 meters
Aux 7
Aux 7
Aux 8
Assignments
Aux 8
Aux 9
Aux 9
13 Sub 1 Sub 2 Sub 3
Aux 10
Yellow Sub 2 Sub 3
Aux 10
Aux 11
Aux 11 DCA 1 DCA 2 DCA 3
14
Aux 12
DCA 1 DCA 2 DCA 3
Aux 12
Aux 13
Mute 1 Mute 2 Mute 3
Aux 13
15
Aux 14
Band Mute 2 Mute 3
Aux 14
50
Touch
Touch a
an Input
Channel
Bank
Setup
1
Gate FX Auxes Presets Setup
3 4
Link
Polarity Mic Phantom Patch Matrix Channel
6 7 8
48V In 1
Normal Reverse
10
Channel Safe
Digital Gain
During Scene Recall
Recallable Safe
12
Main L/R
Sub 4 Sub 5 Sub 6 Sub 7 Sub 8
Sub 4 Sub 5 Sub 6 Sub 7 Sub 8
DCA 4 DCA 5 DCA 6 DCA 7 DCA 8
DRUMS DCA 5 DCA 6 DCA 7 DCA 8
Mute 4 Mute 5 Mute 6 Mute 7 Mute 8
Mute 4 Mute 5 Mute 6 Mute 7 Mute 8
Touch the
Setup
Tab
Scene:
Default
Next
Prev
2
Banjo Main
Reset
Cue Cue
L C R
Mic Main
11
1 L/R
1.00 dB
10 10 10 10
5 5
L L
u u
F
G
5
48
5
10
10
20
0 20
0
LR
40
40
1 2
3 4
∞
5 6
7 8
Mute Mute