Standards; Certification Of Ul, Cul Standards; Compliance With Ec Directive (Ce Marking) - Mitsubishi FX3U-20SSC-H User Manual

FX -20SSC-H Positioning Block User's Manual
3U

Standards

Certification of UL, cUL standards

The following product has UL and cUL certification.
UL, cUL File number :E95239
Models: MELSEC FX
from June 1st, 2006

Compliance with EC directive (CE Marking)

This document does not guarantee that a mechanical system including this product will comply with the
following standards.
Compliance to EMC directive and LVD directive for the entire mechanical module should be checked by the
user / manufacturer. For more details please contact the local Mitsubishi Electric sales site.
Requirement for Compliance with EMC directive
The following products have shown compliance through direct testing (of the identified standards below) and
design analysis (through the creation of a technical construction file) to the European Directive for
Electromagnetic Compatibility (89/336/EEC) when used as directed by the appropriate documentation.
Type: Programmable Controller (Open Type Equipment)
Models: MELSEC FX
from December 1st, 2005
EN61131-2:2003
Programmable controllers
- Equipment requirements and tests
Caution to conform with EC Directives
Attach the ferrite cores to the power supply and the input cables (20SSC-H side).
Attach the ferrite core approximately 200 mm or less from connector on the 20SSC-H side.
20SSC-H
Power supply cable
series manufactured
3U
FX -20SSC-H
3U
series manufactured
3U
FX -20SSC-H
3U
Standard
Ferrite cores
1 turn
External equipment
Input cable
Compliance with all relevant aspects of the standard.
• Radiated Emissions
• Mains Terminal Voltage Emissions
• RF immunity
• Fast Transients
• ESD
• Conducted
• Power magnetic fields
• The ferrite core should use the following equivalent
product:
- Power supply cable (needs at least 1 turn)
Model name: ZCAT2035-0930
- Input cable
Model name: ZCAT3035-1330
Certification of UL, cUL standards
Remark
(Manufactureed by TDK co., Ltd.)
(Manufactureed by TDK co., Ltd.)
9