FX
-20SSC-H Positioning Block User's Manual
3U
3. Address specification
The absolute/relative address can be specified.
With the specified absolute address: Specifies a target address (position) using address 0 as the base.
With the specified relative address: Specifies a travel amount from the current address.
4. Rotation Direction
With the specified absolute address: The rotation direction depends on whether the target address 1 is
With the specified relative address: The rotation direction is decided by the sign (positive/negative) of target
9.10 Linear Interpolation Operation (Interrupt Stop)
larger or smaller than the current address.
address 1.
9 Positioning Control
1
2
3
4
5
6
7
8
9
10
97