Printronix P8000 Series Administrator's Manual page 236

10. To verify installation, go back to the Control Panel and select "System" for WinXP. Under the
"Hardware" tab, select "Device Manager". For Windows 7, select "Device Manager" directly from
Control Panel.
11. Select the "Network Adaptors" and expand the selection if necessary. You should see "Microsoft
Loopback Adaptor" listed. Leave all default settings.
Figure 39 Utilizing the Device Manager to Verify Installation
12. Upon verification, go to Sending Firmware via USB on page 231.
236
Figure 38 Complete Hardware Installation