Web Page Download
NOTE: This download method requires firmware with the .prg extension
FILENAME.prg.
1. Make sure the printer is powered up, in ONLINE mode, and that the Ethernet cable is connected.
2. Get the IP address from the front panel (under Network Setup in the menus).
3. Enter the printer's IP address in your browser (e.g., http://10.224.5.21).
4. When prompted for a user name and password, enter "root" for user name and click OK.
5. Click "System" in the Configuration box.
6. Click the "Upgrade" button.
7. Browse to the directory or enter FILENAME.prg in the "File to upload" field and click "Upgrade". A
Warning message opens.
Figure 24 System Configuration Upgrade
Figure 25 Uploading Firmware File for Upgrade
225