Absorb After ^PY
•
Absorb Motion (factory default). The first paper motion following a ^PY command is ignored.
•
Absorb All. The system ignores all the data and terminator until a host generated motion terminator
is detected.
•
Disable. System terminators following a graphics command are sent to the printer and result in paper
motion.
UPC Descenders
•
Enable (factory default). UPC/EAN barcodes are printed with descenders, even if there is no human
readable data.
•
Disable. UPC/EAN barcodes are printed without descenders if there is no human readable data.
Rot. Char Size
•
Adjusted (factory default). Rotated (clockwise/counterclockwise), expanded characters have a
different size than an unrotated character with the same size parameters.
•
Not Adjusted. Rotated, expanded characters are the same size as unrotated characters with the
same size parameters.
Ignore Spaces
•
Disable (factory default). Trailing spaces are not deleted from the last alphanumeric element in a
graphics pass.
•
Enable. Trailing spaces are deleted from the last alphanumeric element in a graphics pass.
Midline PY (includes ^PN)
•
Disable (factory default). The Graphics mode Enable command, ^PY, must be the first three
characters of a line.
•
Enable. The ^PY or ^PN can occur anywhere in a line.
Print Quality
•
Data Processing (factory default). ALPHA text and barcodes are printed in normal mode at 60 x 72
dpi. This mode should be set if the highest speed is desired.
•
High. ALPHA text and barcodes are printed in dark mode at 120 x 72 dpi.
Expanded Font
•
Scalable (factory default). These expanded characters have rounded edges.
•
Block. These are block characters compatible with IGP-X10 printers.
LP+ Font
•
Disable (factory default). The IGP/VGL uses its default half-dot font, which is slightly different from
the standard bitmap font used by LP+ at 12, 13, 15 and 17 cpi.
•
Enable. The IGP/VGL uses the same font as used by LP+ at all cpi.
MSI Check Digit
•
Print (factory default). The check digit is appended at the end of the printable data field for MSI
barcodes.
•
Don't Print. The check digit for MSI barcodes does not print.
160