Printronix P8000 Series Administrator's Manual page 151

AI 00 Spaces
This option is designated for EAN/UCC-128 barcodes whose application identifier (AI) is 00.
•
Disable (factory default). The printable data field is printed with the AI enclosed in parentheses. This
is the standard EAN/UCC-128 format.
•
Enable. The printable data field is printed with the UCC fields separated by spaces. This option is
IGP-X00 compatible.
Select SO Char
Allows you to specify a decimal code from 0 through 255 to be used in place of SO (Shift Out) as the
control code. This allows access for the alternate set of control function characters. See the description of
the Code 128 barcodes in the IGP/PGL Programmer's Reference Manual for details.
User-Def Ratio
•
Enable (factory default). User-defined ratios are accepted for barcodes.
•
Disable. User-defined ratios are ignored and the magnification X1 is used in its place.
C39 Compatbl.
This menu makes the old method of decoding C39 alternative character set compatible with the new.
•
Disable (factory default) Uses the current way of decoding.
•
Enable. Matches the old method of decoding.
Host Form Length
Determines whether the form length specified in the CREATE command changes the form length
designated in the LP+ menu (see LinePrinter Plus Emulation (ASCII, Indian Language) on page 102)
when the form is printed by the EXECUTE command.
•
Disable (factory default). The LP+ form length is unaffected by the form being printed.
•
Enable. The LP+ form length changes to match the length of the PGL form being printed.
Var Form Adjust
(Ranges from 0 - 30). Default is 0. This menu value is tenths of inches. The value of this menu specifies
the amount of distance to add to PGL forms that have variable form lengths. Variable length forms are
forms that are defined by using a ";0" in the CREATE statement: ~CREATE;FORM;0. Variable form
lengths are defined by the contents within the form - the form is only as long as necessary to print the
form. Changing this menu value adds additional lengths to the form (in tenths of inches). Again, this only
applies to forms that use the ";0" variable length forms.
Var Form Type
This menu option applies only to the host command, CREATE;NAME or CREATE;NAME;DISK. The host
command CREATE;NAME followed by ;0, ;X or a form length number will always override the menu
option.
•
Add Nothing (factory default). No action.
•
Add; 0. When selected, the form length ends at the longest printed element. Same as
CREATE;NAME;0.
•
Add; X. When selected, the form length is the same as the physical page length.
151