Currency Sign (for GB and Kanji)
•
RMB Select (factory default). The ASCII code hex 24 is printed as a RMB "¥" character in DBCS
mode. Default for GB.
•
$ Select. The ASCII code hex 24 is printed as a dollar "$" character in DBCS mode. Default for Kanji.
AR3240 (for GB and Kanji)
•
Disable (factory default). AR3240 emulation does not take effect. Default.
•
Enable. AR3240 takes effect, SUB (0x1A) is used as another SFCC. The listed commands will take
effect and turn the extending table character on.
109