Printronix P8000 Series Administrator's Manual page 313

fail, a message will display on the front panel (in the hierarchy shown on page 312) and the printer will
not copy any settings.
INVALID SD
Power Off Printer
Remove Cartridge
This means that the QCMC is not compatible with the printer's software. A software upgrade is required,
or a different configured QCMC will be needed.
A QCMC validation check will be performed to ensure the data stored on the SD is not corrupted. If the
test fails the following fault message will display.
QCMC DATA ERROR
ON SD
Delete & Resave
QCMC Data
This means that the data on the QCMC was not saved properly, and must be deleted then resaved.
Follow the instructions for deleting files, then repeat the copying process.
If all the checks pass, then the printer will copy the files from the QCMC to the target printer.
DO NOT PWR OFF
Copying QCMC To
Printer...
Upon successful completion, the printer will display the following message on the front panel and reboot
into normal operation.
Copy Complete
313