Printronix P8000 Series Administrator's Manual page 196

Optimize Barcode
Defines whether the barcode optimization feature is active.
•
Yes (factory default). Activates the barcode optimization feature.
•
No. Deactivates the barcode optimization feature.
•
Test. Boxes will print around all barcodes that are detected and replaced. This provides a simple
method to confirm that the software correctly detects and replaces all the barcodes on any given
form.
Alignment
Defines how the optimized replacement barcode will be positioned with regard to the original barcode
position if no obstacles exist to this placement. It defines the first attempted position of the replacement
barcode. If the first attempted position causes a replacement barcode to interfere with any other form
elements (text, graphics, or dots), the replacement barcode automatically adjusts away from these
interfering elements until requested horizontal quiet zones are observed. Selections for this menu are as
follows:
•
Left. The first attempted position of the leftmost bar of the replacement barcode will be the same
position as the leftmost bar of the original barcode. For instance, if the replacement barcode is
smaller than the original barcode, it will be placed as follows:
If the replacement barcode is larger than the original barcode, the replacement barcode will begin at the
left edge of the original barcode and expand beyond the right edge.
196