Filename Extensions Not Shown In Menus - Printronix P8000 Series Administrator's Manual

Web Page (Ethernet only). User needs to know the IP address
and have a browser.
PTX_SETUP (any host IO). User can employ PTX_SETUP
commands around the file data to store the file into the Main File
System.
Manual two-key download (any host IO). This two-key (ADVANCE +
CANCEL) power-up sequence puts the printer into download
mode. Files can then be downloaded.
PrintNet Enterprise (Ethernet only). User must install the PrintNet
Enterprise application from the PrintNet CD. This is the most versatile
and powerful method to download files but requires your computer
can run Java™ programs.
NOTE: Depending on the file download method, the file itself may need to be modified so that when it is
downloaded to the printer, the printer stores the file with the correct Main File System name and
file type.

Filename Extensions Not Shown in Menus

Files with the one of the filename extensions below (upper or lower case) are considered system files and
are not shown in the View File List or Delete Files menu.
NOTE: DO NOT download any user files with the extensions shown in Table 21.
238
Table 20 File Download Methods
File Download Method
Table 21 Filename Extensions Not Shown In Menus
Extensions
*.bin *.inf
*.cpg *.lfi
*.eng *.map
*.fon *.pat
*.gz *.qsm
File Preparation
None required.
Binary (raw) data of the file
is embedded within
PTX_SETUP commands.
Run cnvt2fls.exe to add
the proper header to the
file
For a detailed description,
refer to the PrintNet
Ethernet User's Manual.
*.ras
*.rfv
*.sec