Printronix P8000 Series Administrator's Manual page 272

Displayed Message
WELD SNSR MISSING
See User Manual
XXXX
CHECKING PATTERN
XXXX
MEMORY FAILURE
XXXX
WRITING PATTERN
1
Before contacting an authorized service representative, power off the printer, wait 15 seconds, then
power it back on and rerun your print job. If the message reappears, press CLEAR. If the fault
message still displays, then contact your authorized service representative.
272
Table 23 LCD Message Troubleshooting Table (ASCII)
Can User
Correct?
Yes
No
No
No
Explanation
The incorrect cartridge
type is being used for
the printer.
Running power on
memory test.
Memory in bank xxx has
failed. Power on memory
test.
Running power on
memory test.
Solution
1. Make sure the correct
ribbon cartridge type
is installed.
2.
Make sure the cartridge
is properly seated.
3.
Contact your authorized
service representative.
No action is required.
Contact your authorized
1
service representative.
No action is required.
1