Accessories - Ransomes Matador 71 Safety And Operation Manual

GB-24

ACCESSORIES

TRAILING SEAT
If required a trailing seat may be attached to the
machine by means of a single pin coupling.
FITTING THE TRAILING SEAT TO THE MACHINE
1. Position trailing seat behind the machine.
2. Rotate locking pin forward.
3. Position ball cup over ball on brake bracket.
4. Ensure ball is fully located in cup.
5. rotate locking pin rearwards.
CAUTION
DO NOT make sharpe turns when the trailing
seat is fitted as this may cause the mower
and trailing seat to jack-knife causing loss of
control.
CAUTION
When mowing over uneven groung care
should be taken when the trailing seat is
fitted as an upward force on the hitch may
cause disconnection.
SIDE ROLLS
To allow longer grass to be cut the front roll may be
removed and replaced with side rolls.
GB