Cutting Unit Specification; Cutting Performance; Recommended Lubricants; Accessories - Ransomes Highway3 Safety, Operation & Maintenance Manual

4 SPECIFICATIONS
4.7

CUTTING UNIT SPECIFICATION_________________________________________

Construction
Reel Length
Number of Knives
Reel Diameter (New)
Minimum Reel Diameter (Before Replacement)
Fixed Head Height of Cut (Standard Blade)
Floating Head Height of Cut (Standard Blade)
Floating Head Height of Cut (Thin Blade)
Rear Roll
Height of Cut Adjustment
Transmission
Maximum Reel Speed at Maximum Engine rpm
NOTE
These cutting units are made to cut grass of maximum height 100 mm down to the available height of cut range.
4.8

CUTTING PERFORMANCE _____________________________________________

2.5 Hectares/hr. at 12 kph.
6.2 Acres/hr at 7.5mph
10% allowance is included for normal overlaps and turning at the end of each cut.
4.9

RECOMMENDED LUBRICANTS _________________________________________

Engine oil: Should be to MIL-L-2104C or to A.P.I. Classification CD grades. [10W-30]
TEMPERATURE
Above 25°C (77°F)
0°C to 25°C (32°F to 77°F)
Below 0°C (32°F)
Hydraulic Oil: ISO VG 46.
Grease: K NATE (RJL No. 4213860), or equivalent to MIL-G-23549C, MIL-G-2345C, DIN 51 825
All other applications: Shell Darina R2 lithium based grease or equivalent.
4.10

ACCESSORIES ______________________________________________________

4.10.1 AIR SUSPENSION SEAT KIT

Kit number LMAC201
en-20
Sport 200 Sport 200
Heavy duty welded pressed steel construction
762mm
4
197mm
178mm
12.7mm - 89mm
12.7mm - 35.7mm
9mm - 32mm
76mm Diameter
Adjustable screw system on rear roll
By direct drive through splined hydraulic motor to splined
VISCOSITY
SAE10W-30 or SAE10W-40
SAE10W-30 or SAE10W-40
SAE10W or
SAE10W-30 or SAE10W-40
Sport 200
762mm 762mm
6 8
197mm 197mm
178mm 178mm
reel.
1240rpm
SAE30 or
SAE20 or