Operation Of The Machine - Ransomes Matador 71 Safety And Operation Manual

GB-12
Fig. 7
OPERATION OF THE
MACHINE
Read the Safety Instructions.
BEFORE STARTING THE ENGINE FOR THE FIRST
TIME
1. Remove the sump filler cap (A Fig. 7) and
with the machine on level ground check to
see if sump is filled with oil, if not fill sump up
to the top of the filler hole threads with a
recommended engine oil.
2. Fill the petrol tank with fresh regular grade
lead free petrol.
3. Lubricate the machine (as recommended on
page 30).
TO START THE ENGINE
1. Ensure that the cylinder clutch is disengaged
if fitted.
2. Turn fuel tap to 'ON' position.
3. Ensure that the Parking Brake is engaged.
4. Move the choke lever to the START position.
5. Set the ignition cutout switch to the 'ON'
position.
6. Pull the rope operated recoil starter fully to
start the engine. Allow the rope to recoil
slowly before releasing the handle.
7. Move the choke lever to the RUNNING
position.
TO STOP THE ENGINE
1. Set the ignition cutout switch to the 'OFF'
position and disengage cylinder and landroll
clutch.
IMPORTANT If machine is being left over night or
stored turn the fuel tap to the 'OFF' position.
NOTE: DO NOT allow the engine to idle for
long periods.
GB