6. Do the printer registration and magnification adjustments (see Replacement
and Adjustment - Copy Adjustments).
7. Referring to the SMC data lists, re-enter any values that had been changed
from their factory settings.
8. Do SP2-14 (ID Sensor Initial Setting) and SP2-15-1 (HDD media test).
Check the print quality and the paper path, and do any necessary adjustments.
4.2.8 SOFTWARE RESET
When the printer hangs up, turn the main switch off and on to reset software.
NOTE: The printer has no software reset mode.
4.2.9 PRINTER RESTART AND MENU RESET (USER MENU)
The following parameters are user menu. See section 4.6 User menu.
Printer Restart
This parameter initializes the printer.
Menu Reset
This parameter resets the user menu settings to the default value.
G035
4-20
SERVICE PROGRAM MODE
SM