I/O Board - Ricoh G035 Service Manual

PCBS

6.12.5 I/O BOARD

[A]
G035R531.WMF
[B]
G035R544.WMF
1. Open the front cover.
2. Remove the operation panel cover, connector cover, rear cover, upper cover,
printer controller cover and left cover. (See Covers.)
3. Remove the printer controller box [A] (4 screws, 5 connectors).
4. Remove the I/O board bracket [B] (2 screws, all connectors).
5. Remove the I/O board (4 screws).
NOTE: Make sure that the DIP switch settings on the new board are the same as
those on the old board.
G035 6-52 SM