Stapler Unit Movement Mechanism - Ricoh G035 Service Manual

STAPLER UNIT MOVEMENT MECHANISM

2.3 STAPLER UNIT MOVEMENT MECHANISM
[A]
[B]
[B]
[C]
A697D505.WMF
[D]
A697D506.WMF
Side-to-side:
The stapler motor [A] moves the stapler [B] from side to side. After the start key is
pressed, the stapler moves from its home position to the stapling position.
If two-staple-position mode is selected, the stapler moves to the front stapling
position first, then moves to the rear stapling position. However, for the next copy
set, it staples in the reverse order (at the rear side first then at the front side).
After the job is completed, the stapler moves back to its home position. This is
detected by the stapler HP sensor [C].
Rotation:
In the oblique staple position mode, the stapler rotation motor [D] rotates the
stapler 45° after it moves to the stapling position.
G035 SM
15-10