Development Roller - Ricoh G035 Service Manual

DEVELOPMENT

6.4.3 DEVELOPMENT ROLLER

[D]
[C]
[A]
[B]
[D]
G035R550.WMF
1. Remove the development unit and upper development cover. (See
Development and Development Filter.)
2. Remove the gear [A] (1 snap ring) and the joint bracket [B].
3. Remove the development roller [C] (2 screws).
NOTE: 1) Be careful not to nick or scratch the development roller.
2) When re-installing the development roller, the side seals [D] should be
inside the development unit case.
SM 6-13 G035