Ricoh G035 Service Manual page 135

[A]
A688I406.WMF
[C]
[E]
[D]
A688I404.WMF
8. Attach two mylars [A] to the paper entrance area of the bridge unit as shown.
9. If the optional finisher is installed:
Attach two mylars [B] to the bridge unit as shown.
10. Remove the cover [C].
11. Install the bridge unit (2 screws) [D].
12. Connect the bridge unit I/F harnesses [E].
13. Install the connector cover.
14. Turn on the AC switch and check the bridge unit operation.
SM
BRIDGE UNIT INSTALLATION (A688)
3-17
[B]
A688I402.WMF
G035