Printer Controller - Ricoh G035 Service Manual

SERVICE CALL CONDITIONS

7.1.3 PRINTER CONTROLLER

Error Messages
If an error occurred, the error LED lights and an error message is displayed on the
LCD.
Service Call (SC) Codes
SC No.
Functional problems (Self diagnostic error)
A diagnostic error occurred at power on.
SC2000
The printer controller has a hardware
problem.
Functional problems (Debug trap error)
SC2001
An error has occurred in the printer
controller. The controller has a software
problem.
SC2002 Functional problems (Exception error)
An error has occurred in the controller.
The controller has a software or hardware
problem.
Other Messages
The following errors might need assistance from service.
Error Message
Printer HDD Error.
Parallel
Communication
Error.
Print Over Run.
Memory Overflow.
G035
Description/Definition
Condition
A hard disk error was detected
during downloading the macro
or fonts.
Parallel communication error
occurred during a print job via
the parallel port.
This error occurred when a file
was being printed in banding
mode. A complex page may not
have enough time to image a
band while the engine is printing
the previous page.
This error occurred during
printing.
The language has sent a file
that is too complex to interpret in
the available memory.
7-20
Possible Cause
Printer controller defective.
The controller software has a
problem.
Printer controller defective.
Possible Cause
• Printer HDD defective
• Printer controller defective
• An item in the parallel menu
was set incorrectly
• Parallel cable defective
• Printer controller defective
• Insufficient memory
• A complex page is printed
• The DRAM SIMM board is
defective
• The controller is defective
• Insufficient memory
• A complex page is printed
• The DRAM SIMM is board
defective
• The controller is defective
SM