Table of Contents
Advertisement
3.3 IMAGE MENU
3.3.1 [Image] – [Erase]
Field
Source
Card slot number that has a flash memory card currently installed.
Start Address
A "0 (zero)" appears at default.
To erase the whole card, do not change the setting
Length
Hexadecimal length of the card appears at default.
To erase the whole card, do not change the setting
Base of Address/
Do not change the settings.
Length
The default setting is "Hex".
NOTE: If the specified start address and length do not coincide with block
boundaries on the flash memory card, the message below appears.
SM
Description
10-7
FUNCTIONS
G035
Advertisement
Table of Contents
Troubleshooting
