Bicu Board - Ricoh G035 Service Manual

Rev. 03/2000

6.12.6 BICU BOARD

1. Open the front cover.
2. Remove the operation panel cover, connector cover, rear cover, upper cover,
printer controller cover and left cover. (See Covers.)
3. Remove the printer controller box. (See I/O Board.)
4. Remove the I/O board bracket. (See I/O Board.)
5. Remove the BICU board [A] (5 screws, 1 stud, all connectors).
6. Remove the NV RAM [B] from the old BICU board and install it on the new
board.
⇒
SM
[B]
[A]
6-53
G035R524.WMF
PCBS
G035