[C]
A681I505.WMF
2. Install the two screws [A] loosely.
3. Hang the front stand [B] and rear stand [C] on the screws that were installed in
step 2.
4. Secure the front and rear stands (6 screws, including the two screws [A]).
5. Pull out the stapler unit [D].
6. Draw out the locking lever [E] (1 screw).
7. Align the finisher on the stands, and lock it in place by pushing the locking
lever.
8. Secure the locking lever (1 screw) and push the stapler unit into the finisher.
SM
1,000-SHEET FINISHER INSTALLATION (A681)
[A]
[B]
[D]
3-23
[E]
A681I506.WMF
G035