PHOTOCONDUCTOR UNIT (PCU)
6.3.5 DRUM CLEANING BLADE
[A]
G035R307.WMF
1. Remove the drum. (See Drum.)
2. Remove the charge roller. (See Charge Roller.)
3. Remove the drum cleaning blade [A] (2 screws).
6.3.6 ID SENSOR
[A]
[B]
[C]
G035R931.WMF
1. Remove the PCU and development unit. (See Photoconductor Unit and
Development Unit.)
2. Remove the fusing unit. (See Fusing Unit.)
3. Remove the PCU rail [A] (2 screws, 1 connector).
4. Remove the ID sensor bracket [B] (1 screw, 1 connector).
5. Remove the ID sensor [C] (1 screw).
6. Perform the ID sensor initial setting using SP2-14.
G035
6-10
SM