Sadf Auto Reset - Ricoh ft5035 User Manual

20. SADF auto reset

When you set one original at a time in the optional document feeder, the
Auto Feed indicator lights for a selected time after an original is fed to show
that the document feeder is ready for another original. You can adjust this
time.
For how to change settings,
Default: 5 seconds (Setting: 5)
22. Thick/Thin original mode selection
In thin original mode, thin originals (lighter than 52 g/m
when being fed into the optional document feeder. With the default setting,
this mode is not selected.
For how to change modes,
Default: No (Thin paper mode is not selected.) (Setting: 0)
Setting
0
1
see page 128.
Setting
1 1 second
~ ~
99 99 seconds
see page 128.
No (Thin paper mode is not selected.)
Yes (Thin paper mode is selected.)
Definition
2
) are not damaged
Mode
USER TOOLS
139