Programming Network/Protocol Parameters - Ricoh G035 Service Manual

3.3.3 PROGRAMMING NETWORK/PROTOCOL PARAMETERS

This section gives summaries of how to set up a network interface board in various
network environments.
NOTE: It is not recommended for service technicians to program network and
protocol parameters. Ask the customer's network administrator to program
and manage these parameters.
IPX Network
The following parameters are required for three types of IPX network printing.
Use MAP (Management Access Program) or the NetWare Setup utility to program
these parameters.
NOTE: 1) The MAP utility requires the Microsoft IPX/SPX Compatible protocol
stack on Windows 9x or Windows NT4.0, and a Web browser (Microsoft
Internet Explorer 3.02 or later, or any version of Netscape Navigator).
The "World Wide Web Publishing service" must be stopped before
starting the MAP utility on the Windows NT server desktop.
2) The NetWare Setup Utility requires the Novell 32-bit Client software on
Windows 9x or Windows NT4.0.
Parameter
Enable NetWare
(Default = Yes)
Print Server Name
Print Server Password
Preferred File Server
Preferred NDS Context
Preferred NDS Tree
Print Queue Scan Rate
(Default = 1 s)
Ethernet Frame Type
(Default = Auto-Sense)
Disable Bindery
(Default = No)
NOTE: The preferred NDS context must be typed in without a starting dot ( . ).
• OU=Development.O=Corp [OK]
• .OU=development.O=Corp [NG]
• Develoment.Corp [OK]
• .Develoment.Corp [NG]
SM
NETWORK INTERFACE BOARD (NIB) INSTALLATION
Peer-to-Peer
Novell 2.x/3.x/4.x
Server-less
Bindery Network
Network
Yes
(Check the box) (Check the box)
Yes
No
No
No
No
No
Yes
No
(Uncheck the box)
3-9
Novell 4.x
NDS Network
Yes
(Check the box)
Yes
Optional Optional
Yes
No
No
Yes
Yes
No
Optional
Yes
Yes
No
Yes
Yes
Yes
Yes
G035