Ricoh G035 Service Manual page 142

1,000-SHEET FINISHER INSTALLATION (A681)
[B]
[C]
9. Secure the finisher (1 screw).
10. Adjust the securing knobs [A] under the front and rear stand until the finisher is
perpendicular to the floor.
11. Install the shift tray [B] (1 snap ring).
NOTE: Make sure that the three pegs [C] fit into the slots [D] properly.
12. Connect the finisher cable [E] to the main machine.
13. Turn on the AC switch and check the finisher operation.
G035
[D]
3-24
[E]
[A]
A681I500.WMF
SM