Stack Feed-Out Motor Speed Adjustment - Ricoh G035 Service Manual

4.7 STACK FEED-OUT MOTOR SPEED ADJUSTMENT

NOTE: This adjustment is required after replacing the main board.
1. Set the DIP switches on the finisher main board as follows.
DIP SW
DIP100
DIP101
2. If LED100 remains lit, turn VR100 counterclockwise until LED100 starts
blinking.
3. Turn VR100 clockwise until the LED stops blinking and remains lit.
SM
STACK FEED-OUT MOTOR SPEED ADJUSTMENT
1 2 3
On On Off
On Off Off
15-33
4
On
Off
G035