Ricoh G035 Service Manual page 344

FUNCTIONS
3.3.4 [Image] – [Verification]
Field
Source
Target
Start Address
Length
Base of Address/
Length
If verification was successful, a 'Verification OK!" message pops up.
If verification was not successful, a "Compare error !" message pops up with the
source and target addresses.
G035
Source file name that is currently active in the application.
Card slot number that has a flash memory card currently installed.
A "0 (zero)" appears at default.
Change this setting if necessary.
Hexadecimal length of the source file appears at default.
Do not change the setting.
Do not change the settings.
The default setting is "Hex".
Description
10-10 SM