Ricoh G035 Service Manual page 134

BRIDGE UNIT INSTALLATION (A688)
[A]
[B]
A688I407.WMF
2. Remove the inner tray [A].
3. Remove three covers [B].
4. Remove the cover [C].
5. Remove the cap [D].
6. Open the right cover [E] of the bridge unit and peel off the black tape [F]; then
pull out the connector [G].
7. Install the paper sensor [H] (which is packed along with the printer itself as an
accessory) (1 screw, 1 connector).
G035
[C]
[D]
[H]
[F]
3-16
[G]
[E]
A688I517.WMF
SM