Development; Development Unit - Ricoh G035 Service Manual

DEVELOPMENT

6.4 DEVELOPMENT

6.4.1 DEVELOPMENT UNIT

[A]
G035R552.WMF
1. Pull out the PCU and development unit. (See Photoconductor Unit and
Development Unit.)
2. Remove the PCU from the development unit [A] (2 screws).
NOTE: Be careful not to nick or scratch the development roller.
If you are temporarily installing a used development unit for test purposes for a
long time, perform 2-11 after installation (see the SP mode table for details).
SM 6-11 G035