Setting Finisher Stack Quantity - Kyocera TASKalfa 420i Service Manual

Maintenance
item No.

Setting finisher stack quantity

U237
Description
Sets the number of sheets of each stack on the main tray and on the Inner tray in 3000-sheet document fin-
isher.
Purpose
To change the setting when a stack malfunction has occurred.
Method
1. Press the start key.
2. Select the item to be set.
Display
MAIN TRAY
MIDDLE TRAY
Setting: [MAIN TRAY]
1. Change the setting using the +/- or numeric keys.
Display
0
1
Initial setting: 0
2. Press the start key. The setting is set.
3. Turn the main power switch off and on.
Setting: [MIDDLE TRAY]
1. Change the setting using the +/- or numeric keys.
Display
0
1
Initial setting: 0
Number of sheets of stack on the internal tray for non-staple copying: 10 sheets
2. Press the start key. The setting is set.
3. Turn the main power switch off and on.
Description
Description
Number of sheets of stack on the main tray
Number of sheets of stack on the internal tray for staple copying
Description
Number of sheets of stack on the main tray: 3000 sheets
Number of sheets of stack on the main tray: 1500 sheets
Description
Number of sheets of stack on the internal tray for staple copying: 50 sheets
Number of sheets of stack on the internal tray for staple copying: 30 sheets
2KR/2KS
1-3-61