Setting Punch Destination; Setting The Limit For The Ejection Section Of The Built-In Finisher - Kyocera TASKalfa 420i Service Manual

2KR/2KS-1
Maintenance
item No.

Setting punch destination

U234
Description
Sets the destination of punch unit of 3000-sheet document finisher.
Purpose
To be set when installing a different punch unit from the destination of the machine.
Setting
1. Press the start key.
2. Select the destination.
Display
AUTO
JAPAN METRIC
INCH
EUROPE METRIC
Initial setting: AUTO
3. Press the start key. The setting is set.
4. Turn the main power switch off and on.

Setting the limit for the ejection section of the built-in finisher

U236
Description
If the machine is equipped with an built-in finisher, this mode sets whether A5R/B5R/statement size paper is
output to the machine top tray or not.
Purpose
If the machine is equipped with an built-in finisher and if paper jams occur due to curling of paper in the built-
in ejection section when two-sided copying onto A5R/B5R/statement size paper is performed, this mode is
used to change the setting to ON to disable ejection to the machine top tray.
Setting
1. Press the start key.
2. Select ON or OFF.
Display
ON
OFF
Initial setting: OFF
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-60
Description
Description
With no punch unit
Metric (Japan) specifications
Inch (North America) specifications
Metric (Europe) specifications
Description
Does not eject to the machine top tray.
Eject to the machine top tray.