Others - Kyocera TASKalfa 420i Service Manual

2KR/2KS

(4) Others

11
16
15
9
10
4
5
1. Paper feed clutch 1 (PFCL1) ....................... Primary paper feed from the cassette 1.
2. Paper feed clutch 2 (PFCL2) ....................... Primary paper feed from the cassette 2.
3. Feed clutch 1 (FCL1) ................................... Controls the drive of feed roller.
4. Feed clutch 2 (FCL2) ................................... Controls the drive of feed roller.
5. Feed clutch 3 (FCL3) ................................... Controls the drive of feed roller.
6. MP paper feed clutch (MPPFCL) ................. Primary paper feed from the MP tray.
7. MP feed clutch (MPFCL).............................. Controls the drive of MP feed roller.
8. Registration clutch (RCL)............................. Secondary paper feed.
9. Duplex feed clutch (DUPFCL)...................... Controls the drive of the duplex feed roller.
10. Developing clutch (DEVCL) ......................... Controls the drive of the developing section.
11. Feedshift solenoid (FSSOL)......................... Operates the feedshift guide.
12. Toner feed solenoid (TNFSOL) .................... Replenishes toner.
13. Exposure lamp (EL) ..................................... Exposes originals.
14. Cleaning lamp (CL) ...................................... Removes residual charge from the drum surface.
15. Fuser heater 1 (FH1) ................................... Heats the heat roller.
16. Fuser heater 2 (FH2) ................................... Heats the heat roller.
17. Fuser thermostat 1 (FTS1)........................... Prevents overheating in the fuser section.
18. Fuser thermostat 2 (FTS2)........................... Prevents overheating in the fuser section.
19. Hard disk unit 1 (HDD1)............................... Storages the image data and information of job accounting mode.
20. Hard disk unit 2 (HDD2)............................... Storages the image data and information of job accounting mode.
21. Cassette heater (CH) ................................... Dehumidifies the cassette section.
2-2-6
13
19
17,18
12
14
8
3
1
2
20
6
7
21
Figure 2-2-4 Others
Machine front
Machine inside
Machine rear