Compaq ProLiant DL760 Maintenance And Service Manual page 68

2-44 Compaq ProLiant DL760 Servers Maintenance and Service Guide
4. When the green LED is off, disconnect the cables to the PCI/PCI-X expansion board.
5. Press down on the top of the expansion slot
6. Lift up the I/O plenum
7. Remove the PCI/PCI-X expansion board
8. Return power to the slot by pressing the PCI Hot Plug button. The green LED will flash
during the power up transition and will glow steadily when power up is complete. For
more information on PCI Hot Plug LED indicators, see Chapter 4, "Connectors, Switches,
and LED Indicators."
Figure 2-39. Removing a PCI/PCI-X expansion board
Reverse steps 1 through 8 to replace the PCI/PCI-X expansion board.
IMPORTANT: If you are only removing the expansion board, install an expansion slot cover in the slot.
IMPORTANT: Remove any shipping brackets from the replacement expansion board before installation.
.


2
3
, and open the slot release lever

.

5
4
.