Dual Inline Memory Modules - Compaq ProLiant DL760 Maintenance And Service Manual

2-28 Compaq ProLiant DL760 Servers Maintenance and Service Guide

Dual Inline Memory Modules

Compaq ProLiant DL760 servers ship with 128-MB, 256-MB, 512-MB, or 1-GB Synchronous
DRAM (SDRAM) Dual Inline Memory Modules (DIMMs) installed. Memory can be expanded
to a maximum of 16 GB. Install SDRAM DIMM module pairs, one module at a time, into the
proper sockets.
Adhere to the following guidelines when installing or replacing memory:
I
DIMMs must be installed in pairs.
I
Use only 128-MB, 256-MB, 512-MB, or 1-GB SDRAM DIMMs.
I
Both DIMMs of a given bank must be the same size, type, and speed.
The recommended SDRAM DIMM installation order is to begin with Bank 1, DIMMs 1 and 2,
and then populate toward Bank 8.
Figure 2-23 shows DIMM memory bank locations 1 through 8 and DIMMs 1 through 16 on the
memory expansion board in Compaq ProLiant DL760 servers.
DIMM 2
DIMM 4
DIMM 6
DIMM 8
DIMM 10
DIMM 12
DIMM 14
DIMM 16
Figure 2-23. Locating DIMM sockets on memory banks 1 through 8
CAUTION: Compaq recommends using only Compaq SDRAM DIMMs. DIMMs from other
sources may adversely affect data integrity.
Memory
Banks
1
2
3
4
5
6
7
8
DIMM 1
DIMM 3
DIMM 5
DIMM 7
DIMM 9
DIMM 11
DIMM 13
DIMM 15