Compaq ProLiant DL760 Maintenance And Service Manual page 97

Each PCI Hot Plug button
Activating or deactivating a PCI Hot Plug slot can also be accomplished through the operating
system PCI Hot Plug software application. For more information, refer to the Compaq
ProLiant DL760 Server User Guide, and the "PCI Hot Plug Important Facts" section in the
online PCI Hot Plug Administration Guide on the server documentation CD.
Figure 4-9. PCI Hot Plug LED indicators in the I/O module
Table 4-8 shows the appropriate slot condition and status for each state of the two PCI Hot Plug
LEDs.
Green LED Amber LED


On Off
On On
Flashing Off
Off On
Off Off
PCI Hot Plug Button

is used to activate or deactivate its associated PCI Hot Plug slot.

1 2
3
Table 4-8
PCI Hot Plug LED Indicators and Button
OK to Open
No Power is on. The slot does not require attention.
No Power is on. The slot requires attention. There may be a
problem with the slot, the PCI/PCI-X board, or the driver. Do NOT
open the slot release lever.
Refer to the IML and/or the PCI Hot Plug software application for
a description of the problem indicated.
No Power to the slot is being turned off or on. This process may
take several minutes. DO NOT open the slot release lever until
the green LED is completely off.
Yes Power is off. You may replace or remove a board in this slot
depending on the operating system. (If Windows NT or Windows
2000, this device requires attention).
Yes Power is off. You can replace or remove the board in this slot
only.
Used to activate and deactivate the associated PCI Hot Plug slot.
Connectors, Switches, and LED Indicators 4-11
Slot Condition and Status