4-8 Compaq ProLiant DL760 Servers Maintenance and Service Guide
LED Indicators
This section contains graphics and tables showing LED locations and functions on the system
interconnect status indicators, hot-plug I/O fan, PCI Hot Plug LED Indicators, hot-plug power
supply, and hot-plug SCSI hard drive.
System Interconnect Status Indicator LEDs
Figure 4-6 and Table 4-7 show the location and identification of the system interconnect status
indicator LEDs.
Figure 4-6. System interconnect status indicator LEDs
Indicator
IMPORTANT: To check system interconnect status indicator LEDs, place the server in Standby mode
with the power supplies plugged in.
1
2
Shutdown
P8
3
P7
4
P6
5
P5
P4
6
P3
7
P2
8
P1
Memory
9
9 VRM
10
Host Mod
I/O Mod
11
Media Mod
12
SCSI Bd 1
13
SCSI Bd 2
14
Reset
15
16
17
System Interconnect Status Indicators
Component
Emergency shutdown
Processor – MP8
Processor – MP7
Processor – MP6
Processor – MP5
Processor – MP4
Processor – MP3
Processor – MP2
Processor – MP1
Table 4-7
Indicator
Component
Memory board
Processor Power Module
Processor and Memory Module
I/O module and fans
Media module
SCSI backplane 1
SCSI backplane 2
Reset